DVD burners fail when trying to create a video disc
Asked by
MellowPine47
I'm using Windows with an external Verbatim DVD burner connected to my laptop over USB-C. I've also tried an Amicool burner, but neither has successfully burned a disc. In DVDStyler, I'm trying to put a 100-minute video onto Verbatim DVD-R media at 8x speed. After burning seven discs, every attempt fails with an error similar to "WRITE@LBA=10h failed," "INVALID ADDRESS FOR WRITE," followed by "mkisofs: Broken pipe" and "Failed." I'm not sure whether the problem is the drive, the blank discs, the video size, the burn speed, or my DVDStyler settings. What should I check or change?
Answers
Use a DVD-RW for testing so you don’t keep wasting recordable discs. First create an ISO or DVD folder in DVDStyler and verify that it completes successfully. If the image builds correctly but the actual write fails immediately at a very low address, the issue is more likely the media, drive, connection, or burn settings than the video itself.
Reply to this answer
Try lowering the write speed instead of forcing 8x. Use a fresh disc, preferably from a reliable batch, and test at 4x or the drive’s recommended speed. Also make sure the external drive has a stable USB connection and is receiving enough power.
Reply to this answer
The exact error and setup details matter here. Check how large the authored DVD image is, not just the video’s running time. A single-layer DVD-R holds about 4.7 GB, and a 100-minute project can exceed that depending on the video bitrate and menus. Make sure DVDStyler is set to the correct disc capacity and that the project fits before burning.
Reply to this answer
The “INVALID ADDRESS FOR WRITE” and broken-pipe messages indicate that the drive rejected a write command, but they don’t identify the root cause by themselves. Confirm that DVDStyler is targeting the correct optical drive, update or reinstall its burning components if possible, and try the same blank media in one drive at a slower speed. If both drives fail with the same discs, test a different brand or batch of DVD-R media.
Reply to this answer
Add your answer
Answers are reviewed before publication.
Related Discussions