I just put together my first PC, but I'm running into a problem. Initially, when I tested the components outside the case, the GPU worked perfectly and I got a signal. However, after I installed everything into the case and reconnected everything, the GPU won't turn on and there's no signal at all. I'm a bit stumped on what to do next. Any advice would be greatly appreciated! Here are the parts I'm using: https://pcpartpicker.com/list/dHFWxg
4 Answers
I think I found your issue! It looks like according to PCPartPicker, you might need to update the BIOS of your motherboard to make your processor work properly. Definitely check that out!
I noticed that the link you posted might be incorrect. You could try creating a proper permalink for your PCPartPicker list. Just click 'Edit this Part List' to generate an anonymous link. Alternatively, you can make a table to show your parts easily.
First, try disconnecting the power cable and removing the GPU. After that, reinstall it and make sure it's properly seated in the motherboard. Don't forget to check both ends of the GPU power cable to ensure they're connected snugly. Not much else could go wrong that would stop the GPU from powering up!
This may sound a bit odd, but double-check that you're using the right cable and that it's plugged into the correct port. Sometimes it's the little things that cause the hiccups!
Related Questions
Lenovo Thinkpad Stuck In Update Loop Install FilterDriverU2_Reload