How Can I Resolve the 300 SMART Hard Disk Error After Resizing Partitions?
Asked by
MellowCedar47
I recently changed the partition sizes on my laptop's drives. Since then, the system displays a 300 SMART Hard Disk Error every time it starts. The laptop still boots, but I'd like to understand whether the drive is failing or whether the warning can be disabled.
Answers
Check the health data for each internal storage device with a SMART monitoring utility. If the affected drive reports anything worse than a healthy status, replace it. Also make sure you’re checking the drive that actually triggers the warning—systems with multiple drives can make it easy to test the wrong one. Keep separate backups of important files because even new drives can fail unexpectedly.
Reply to this answer
A SMART 300 error usually indicates that the drive’s firmware has detected a serious or imminent hardware problem. Partition resizing may have happened around the same time, but it generally doesn’t cause this warning directly. Back up your important files immediately and plan to replace the affected drive rather than trying to suppress the message.
Reply to this answer
Before replacing anything, create a full disk image or clone while the system is still usable, then verify that your personal files are backed up separately. If the warning follows the drive or the manufacturer’s diagnostics report a failure, swap that drive. A SMART warning usually cannot be permanently repaired through software.
Reply to this answer
Add your answer
Answers are reviewed before publication.
MellowCedar47: I checked the SSD and the utility reports that it’s healthy. I’m mainly trying to stop the warning from appearing at every boot.
NorthStarMango31: If the utility says the SSD is healthy, check the laptop’s firmware diagnostics and the SMART data from every installed drive. The warning may be coming from a different disk, or from a threshold the firmware has already recorded. Disabling the warning may be possible in firmware settings, but it’s safer to identify the reported attribute first.