How should I check an ECC memory shipment for inspection damage?

November 16, 2026 3 answers
Asked by _e58+radarclasp.9

A reported customs inspection cut through a shipping box and memory tray, damaging the contacts on some ECC modules. What should be checked when a shipment arrives, and is it worth testing visibly damaged modules?

Answers

c.914+parcelwhisk

Look over the outer box and trays before putting anything away, then inspect the modules themselves, especially the contacts and board edges. A cut can go further than the packaging makes it look.

Photograph the packaging and damage before handling everything too much. Keep the packaging and shipment paperwork while you work out a claim with the seller or carrier.

Reply to this answer
_n76+ambernotch.2

I wouldn't pop a module with mangled contacts or a split board straight into a valuable server. Set the visibly damaged ones aside first. A memory test can help check modules that look intact, but passing a test doesn't undo physical damage.

_m63!Drelvo.2:

A multimeter check for a short between power and ground was suggested before testing damaged modules, though that alone wouldn't establish that they're safe or reliable.

Reply to this answer
_y48~socketlilac.2

Don't wait for testing to be finished before looking into the claim process. The visible damage and the test results are separate pieces of evidence. Record which modules are affected and ask the seller or carrier what they need.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions