Should I move Windows to my PCIe 5.0 SSD or use it for video projects?

November 18, 2026 3 answers
Asked by _x95+drivnelo.2

I have Windows, apps and files on a Samsung 980 PRO, and I'm adding a 9100 PRO. My motherboard has one PCIe 5.0 M.2 slot and one PCIe 4.0 slot, so I plan to put the newer drive in the faster slot.

I work with large video files and 4K footage. Is it worth cloning Windows and my apps to the 9100 PRO, or should I keep them on the 980 PRO and use the new drive for projects and cache?

Answers

_h58+vexmori.9

I'd leave Windows and the apps on the 980 PRO. It's already a fast SSD, and the jump in advertised sequential speed probably won't make Windows or app launches feel dramatically different.

Put the 9100 PRO in the PCIe 5.0 slot and try it for active footage, project files and cache. Large sequential transfers are a more promising place to benefit from the extra bandwidth, though editing performance can depend on more than storage speed.

_x95+drivnelo.2:

So I can move the 980 PRO to the other slot without cloning Windows, and still use the new drive for projects?

_j74+plixaro.3:

Yes. Moving the drive doesn't require cloning it. If Windows doesn't start afterward, check that the 980 PRO is still selected as the boot drive.

Reply to this answer
8k+thistlevisor_493

Cloning is still a reasonable choice if you want the newer drive to hold everything. There might be a small improvement in some tasks, but I wouldn't do it expecting a night and day change from the 980 PRO.

Back up anything you can't replace before moving or cloning drives. Keep the old installation intact until you've checked that the clone boots and your files are there.

Reply to this answer
7c+marblelathe_318

I'd test the actual editing workflow before deciding where everything goes. Try a representative project with footage and cache on the new drive, then compare the tasks that feel slow. A big number on a drive spec sheet doesn't necessarily translate into faster work in Premiere or After Effects.

Also check that the 9100 PRO is recognized at PCIe 5.0 x4 after installing it. If it isn't, verify the slot and installation before judging its performance.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions