Why does my PC freeze in games but pass stress tests?

November 17, 2026 4 answers
Asked by q.469~ferrulecradle

My Windows 11 PC freezes during games even after a clean reinstall. Sometimes audio keeps playing, then the screen goes black and the PC restarts or boots into BIOS. CPU and GPU stress tests haven't reproduced it.

It's a Ryzen 7 5800X with an RTX 4060, 32GB DDR4-3600, an NVMe SSD and an HDD. Where should I look next?

Answers

Terviloq-6n

I'd start with the RAM because it's a free test. Disable the memory profile in BIOS and run at the default speed, then try the games that normally freeze. A stress test passing doesn't rule out instability at DDR4-3600.

Run a dedicated memory test too, preferably for several passes. If the default speed helps, check the motherboard model and BIOS version before considering an update. Back up anything you need first.

Reply to this answer
5d+frostvisor_928

Booting into BIOS afterward makes the storage worth checking, though it doesn't prove the drive is bad. See whether the NVMe drive is detected in BIOS after a freeze, and check its SMART health information in Windows. Also note which drive holds Windows and which one holds the affected games.

That volmgr 161 event can indicate Windows couldn't write a crash dump. It doesn't identify the cause by itself. A drive dropping offline is one possibility, but memory or another fault could also be involved.

_r5+veltrix.8:

Back up your files before doing disk or BIOS troubleshooting, especially if the boot drive sometimes disappears.

Reply to this answer
Javlori.6p

I'd check power and connections next. With the PC shut down and unplugged, inspect the GPU power connector and other accessible power cables for loose seating or obvious damage. A different outlet or power strip is an easy thing to try too.

If you can borrow a compatible, known-good PSU or GPU, swap one part at a time and retest. Don't buy a stack of replacement parts based on a freeze alone. A game can load the system differently from a synthetic test.

Trelmavi.4n:

When testing another modular PSU, use the cables supplied for that PSU. Modular cables aren't necessarily interchangeable.

Reply to this answer
Neruvo-3c

Check which NVIDIA driver version is installed and whether any GPU tuning or overclocking is active. You could try a clean graphics driver installation and test at stock settings.

Temporarily lowering the GPU power limit is another diagnostic test. If it changes the behavior, that points toward something worth investigating around the GPU or power delivery, but it won't establish which part is faulty. A short stable session doesn't prove the issue is fixed either.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions