I'm having a frustrating issue with my PC where the monitor just displays 'no signal' whenever I turn it on. I've made sure that both the DisplayPort and HDMI cables are connected correctly to the GPU. There's a white light on the motherboard indicating an issue with the DRAM. I've tried reseating the RAM multiple times, but I'm wondering if I'm doing something wrong or if there's another problem at play here.
2 Answers
I faced a similar issue before. My monitor's screen would randomly go black, and after a lot of troubleshooting, I discovered it had a proximity sensor activated. It was a relief and also frustrating, so consider checking if there's anything like that on your monitor!
You might want to try using just one stick of RAM at a time and test all the slots to see if one of them is faulty. Also, consider doing a BIOS CMOS reset and maybe even update the BIOS. Remember, you only need to connect either the DisplayPort or HDMI to the monitor, not both!
Related Questions
Lenovo Thinkpad Stuck In Update Loop Install FilterDriverU2_Reload