Anyone having HBA failures during firmware updates on DL380 Gen10 Plus?

November 16, 2026 3 answers
Asked by m.694~portgrommet

We have 15 HPE DL380 Gen10 Plus hosts with three HBAs per host. Firmware updates on the MR216i-A and MR216i-P have repeatedly left cards unusable, and we've replaced at least nine. HPE has documented a rare failure, but we're seeing it much more often. Has anyone found a way to avoid it?

Answers

t.861~fusebasket

I'd start by checking the documented upgrade path for the firmware version currently on each card, rather than assuming the latest package can be applied directly. Some hardware needs intermediate versions, so it's worth confirming the sequence with HPE for these exact models.

m.694~portgrommet:

The cards were quite outdated, but we started with the oldest available HPE firmware and followed the path toward current. One still failed after just one update.

Reply to this answer
b.405+ctrlspool

Since it's happening across a fleet and you already have support, I'd push for a deeper escalation rather than treating each card as a separate replacement. Give them the starting firmware, target version, update method and logs for both successful and failed attempts. That should help narrow down whether there's a common trigger.

Reply to this answer
p.638+foldmarker

I wouldn't keep flashing the rest of the fleet until HPE has reviewed a failure. Schedule any further tests so a failed controller can be replaced without taking critical workloads by surprise. Also confirm backups and recovery procedures before touching the storage firmware.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions