Can I still restore a locked iPad from a Windows 11 PC?

November 16, 2026 4 answers
Asked by _a34!gaugebasket.9

We have Jamf-managed iPads without cellular service. After a reboot, they are not connecting to Wi-Fi before the passcode is entered, so we cannot send a passcode command through Jamf.

Two iPads with forgotten passcodes are not showing up in iTunes, Apple Devices, or Windows Device Manager in recovery mode. Different cables and PCs have not helped. Does restoring from Windows still work, and what else should I check?

Answers

_w63!cobaltshuttle.7

Windows restore has not gone away. Both iTunes and Apple Devices are options for restoring an iPad, so buying a Mac should not be the first step.

Since neither iPad appears in Device Manager, I would focus on the USB connection and recovery sequence before assuming Jamf is involved. Make sure the cable supports data, try another port, and repeat the model-specific recovery mode steps. A USB-A cable is worth trying if you have one, though it sounds like you have already tested several cables.

_a34!gaugebasket.9:

I've already tried different cables and computers, but I'll double-check the recovery sequence.

Reply to this answer
_u86+syncpouch.3

Try a clean software test on a spare Windows machine. One suggestion is to remove both iTunes and Apple Devices, then install just one and try the restore again. There is a report of the two installations interfering, but that does not establish that they are the cause here.

You could also compare a machine without the same security policies. Controlled folder access is a possible lead, not a confirmed explanation for the iPads being absent from Device Manager.

Reply to this answer
4p+gingerwicket_831

If the iPads have cellular hardware and a SIM tray, a SIM with an active plan and no SIM PIN could give them a way online without Wi-Fi. That may let Jamf deliver a passcode command. A Wi-Fi-only iPad cannot use that workaround.

Reply to this answer
Ravelo-5u

For future devices, consider the managed setting that erases an iPad after a configured number of failed passcode attempts. That gives you another recovery route, but it also means someone entering the wrong code repeatedly could wipe the device. Make sure that risk fits your setup before enabling it.

If the devices are registered for automated enrollment, restoring them should allow them to enroll again during setup. The restore erases the device, so it is a redeployment path rather than a way to recover local data.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions