Can you still get hardware thin clients for a Telnet application?

November 19, 2026 4 answers
Asked by 3u~brackenstaple_629

We have a legacy retail system that staff access through Telnet, mostly from Windows PCs. Are dedicated terminals still available, and what should we look for if we want something simpler to deploy in Canada?

Answers

_n86~bravdexo.4

A practical option is a general-purpose thin client configured to launch a terminal emulator at startup. Wyse is one product line worth checking, but verify the exact model and software support Telnet before buying.

Test the emulator with your application, especially screen layout, function keys, keyboard mappings and printing. A thin client is not necessarily a dedicated Telnet appliance, so check what management and lockdown options it offers too.

Reply to this answer
3w+brackenwicket_526

For a low-cost build, a small Linux device such as a Raspberry Pi could boot straight into a Telnet session. You can leave out the desktop, disable unneeded services and consider a read-only filesystem.

That gives you control, but it also makes you responsible for building, updating and maintaining the image. Try one at a counter before committing to a whole fleet.

Reply to this answer
Varnelo+7j

Keep security separate from the hardware decision. Telnet sends traffic without encryption, so a locked-down terminal alone does not protect credentials or application data on the network.

One possible design is a gateway that connects to the old server over Telnet while clients connect securely to the gateway. Restrict access to the legacy server so only the gateway can reach it, and check whether the application works properly through that setup.

f.731+sprigbutton:

That still leaves the gateway-to-server Telnet connection unencrypted, so the network segment between them needs attention too.

Reply to this answer
q.618+plovrani

Used terminals may be an option, but check availability and shipping in Canada with resellers before planning around a particular model. Confirm that it supports Telnet and your terminal type, and ask about power supplies, spare units and firmware support.

Purpose-built devices with small firmware have existed, but suppliers and product lines can disappear. I would want a working sample and a spare-parts plan before relying on them.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions