Has anyone tackled device isolation on a wired LAN?

November 18, 2026 5 answers
Asked by Roxie

Our endpoints are cloud joined and managed, the local servers are gone, and printing no longer depends on shared local printers. We're considering isolating devices from each other on the wired LAN. What approaches and gotchas should we look at?

Answers

Tivora-2j

Network access control with certificate-based authentication is one option. A NAC system can use device identity and management compliance to decide whether to admit a machine, place it in a quarantine VLAN, or apply a dynamic ACL that blocks access to other local endpoints.

That also makes moves between desks less dependent on manually changing port assignments. Check what your switches and NAC support before designing around dynamic ACLs, though.

_j71~plimora.9:

Document the policy for support staff. A test machine that can't ping another device on its subnet can look like a broken network when isolation is actually working.

Reply to this answer
2k!socketgizmo_741

Start with the threat you're trying to address. Blocking a random device from joining the LAN and limiting lateral movement from an infected endpoint are different problems. Port security may help with the first, while isolation addresses the second.

Endpoint detection and response is another layer worth considering, not a direct replacement for network controls. It can also be bypassed.

Reply to this answer
t.683+plaidthunder

Private VLANs are worth a look if your switching gear supports them. The idea is to keep endpoints from talking directly to one another while still allowing the connections they need to reach network services.

Check for exceptions before rolling it out broadly. Shared printers, IoT devices, test equipment, and troubleshooting tools may need different treatment from managed workstations.

Reply to this answer
_y65!flindora.8

You could also enforce east-west isolation through an endpoint-based SASE or zero trust client. That puts the policy on the device rather than relying entirely on the office switches, and may extend protection when a laptop is away from the office.

The tradeoff is that the approach depends on the client and its policy coverage. Consider how you'll handle devices that can't run it.

Reply to this answer
Quenlo+6v

Full isolation doesn't have to mean treating every port identically. Microsegmentation can separate managed endpoints, unmanaged devices, and IoT equipment, with rules suited to each group. If a shared printer turns up later, a separate IoT VLAN or a specifically trusted port could be an exception.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions