A contractor upgraded our building's door and elevator access system with a web console and suggested forwarding it directly through a consumer router. We'd like remote access without exposing the console to everyone online. What are some affordable options that won't be a nightmare to maintain?
How can we secure remote access to a building access console?
Answers
Keep the web console off the public internet and require a VPN for remote access. Check whether the existing router has a supported VPN server before buying anything. A router with WireGuard support is another option if it doesn't.
A self-hosted VPN may still need a network port exposed, but that exposes the VPN endpoint rather than the access-control web app. Give each authorized person their own access and remove it when they no longer need it. Keep the router and console software updated, and change any default passwords.
Reply to this answer
A managed VPN such as Tailscale could be a good fit if you don't want another box. You'd need a supported device on the building network, potentially the existing server if the vendor allows it, and authorized users would need to sign in and run the client.
Check the access rules and account recovery setup as well as the cost. It can avoid forwarding an inbound port on the router, but someone still has to manage the service and keep the device updated.
Reply to this answer
Ask the access-control vendor for its network and hardening guidance before installing anything on the server. Also get the contractor to explain in writing how remote access is meant to work, who on their side can log in, and whether direct port forwarding is actually their standard setup.
That matters for support and for the next service visit. A VPN won't help much if someone later puts the web console back on a public port for convenience.
_w39~nexlavi.6:
Ask who will maintain the remote access setup after installation too. The building should have a way to remove a contractor's access when it's no longer needed.
Reply to this answer
A separate small computer running WireGuard or a replacement router can do the job if the server shouldn't have extra software installed. Compare the hardware cost, power use, and upkeep rather than assuming an old PC is free to run. Whatever you choose, document how someone else can administer it.
Reply to this answer
An IP allowlist can limit who reaches a forwarded service, but it is awkward if administrators need access from changing networks. I wouldn't use a blanket public forward just to make access convenient. A VPN is a better match for access from different locations.
Reply to this answer
Add your answer
Answers are reviewed before publication.
_a47!brindlecog.9:
We can leave the console on the local network while we figure out remote access. I'll check what the current router supports first.