Is 80C while gaming normal for a 5800X3D with a 240mm AIO?

November 17, 2026 4 answers
Asked by Vexnaro-3k

My 5800X3D reaches about 80C in games with a new 240mm AIO. I briefly mounted the cooler over a thermal pad by mistake, then removed the pad and remounted it. Some of the cooler's pre-applied paste came off in the process.

The curve is set to minus 20 on all cores, the CPU fan is on a performance setting, and the pump is on default. Is 80C okay, or should I repaste?

Answers

q.841~buttonwrench

80C in a game is not automatically a problem for this CPU. The 5800X3D has a 90C maximum operating temperature, and its stacked cache makes getting heat out of the chip more difficult. A bigger cooler doesn't necessarily produce a huge temperature drop.

That said, I'd repaste because the cooler was lifted after the paste made contact, not because 80C alone proves anything is wrong. Clean off the old material, apply fresh paste, and remount the block evenly.

8g~clovermixer_352:

A 10C improvement over the stock air cooler can still be reasonable. The game, CPU load, airflow, and fan speeds all affect the comparison.

Reply to this answer
v.417~brindlecrank

Check the pump before buying anything. Make sure it's connected to the intended header, shows a sensible speed in the BIOS or monitoring software, and isn't being held to a very low speed by the default curve. Also check the radiator fans and case airflow.

If the pump reading looks odd, compare the connection and control settings with the cooler's instructions. A temperature reading on its own can't tell you whether the pump is working properly.

Reply to this answer
_g73!orbitstencil.9

I wouldn't rush to repaste just because of 80C. If the system is stable and the temperature isn't regularly climbing to 90C, you can leave it alone and keep an eye on it. The disturbed paste makes a fresh mount worth considering, but the temperature by itself doesn't establish that the mount is bad.

Reply to this answer
Nerxavi+6p

There's a lot of variation between games, so it helps to look at CPU package power and clock speeds alongside temperature. Note whether 80C is a brief peak or where it settles during a longer session. A demanding game and a lightly loaded one aren't directly comparable.

If it's regularly reaching 90C or performance seems off, then I'd investigate the mount and cooling settings rather than assuming the AIO is too small.

7d~ferryshuttle_395:

The minus 20 curve setting is also worth stability testing. An all-core setting that works for one chip isn't guaranteed to be stable on another.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions