I updated the BIOS without the CPU or RAM installed, then assembled the PC. It won't boot and the POST display is stuck on EC, which I can't find in the code list. The CPU and RAM lights are also on. Could the update have damaged the components?
PC won't boot after BIOS Flashback, what should I check?
Answers
A failed or incorrect BIOS update is one possibility, but the symptoms alone don't mean the components are fried. Clear the CMOS using the procedure in your motherboard manual, then try again.
If it still won't POST, check that the BIOS file is for your exact motherboard model and repeat the Flashback procedure as described in the manual. Follow its instructions for the USB drive, file name, port and completion indicator.
Reply to this answer
Check the CPU power connector at the top of the board, not just the main motherboard connector. Make sure it's fully seated. Then power off and reseat the RAM, checking the manual for the recommended slots. With two sticks, those are often the second and fourth slots from the CPU.
Reply to this answer
Strip it back a bit. Try one RAM stick in the slot recommended by the manual, then try the other stick if there's no change. You can also reseat the graphics card and check its power connections. If the RAM came from another working PC, testing it there again could help narrow things down.
Reply to this answer
Don't put too much weight on EC until you've checked the documentation for that specific board. The CPU and RAM lights tell you where the boot process is getting stuck, but they don't by themselves prove either part is dead.
Reply to this answer
Add your answer
Answers are reviewed before publication.
5v!claspwren_837:
The exact slot recommendation varies by board, so the manual is the better guide if the labels or layout are confusing.