Why are Universal Print jobs immediately pausing on some direct-registered printers?

November 17, 2026 5 answers
Asked by _r68+modspindle.4

Several FUJIFILM Apeos printers receive Universal Print jobs but immediately pause them. Other direct-registered printers still work, and the affected devices work through the print connector.

Rebooting, re-registering, and creating a new share haven't helped. The working devices share a firmware version, but an update to a different version didn't fix one affected printer. What else would you check?

Answers

3x~copperpuzzle_692

The firmware pattern is worth testing. The working devices listed are all on 26.7.14, while several failing devices are on older versions. That doesn't prove firmware is the cause, but it gives you a useful comparison.

Ask FUJIFILM for the appropriate firmware for each model and test 26.7.14 on another affected device if it's supported. Record the model, starting version, and result before rolling it out more widely. A successful test on one printer is encouraging, not a fleet-wide fix.

_r68+modspindle.4:

I've got a manual copy of 26.7.14 from FUJIFILM. One test has worked so far, but I still need to try more devices.

Reply to this answer
Velnori-7g

Check the FUJIFILM Printer Support App on a client that can't print. Remove it from Settings, Apps, Installed Apps, then send another test job to the direct-registered printer. It's a fairly quick way to check whether the recently installed app is involved.

Keep in mind that some printers work with the app present, so a successful test would be a lead rather than proof that every failure has the same cause.

Reply to this answer
2n~plovergrommet_641

The connector working is a useful workaround while you investigate. It suggests the printer can accept jobs through that route, but it doesn't rule out a problem with the direct Universal Print path. The tradeoff is relying on the print server again.

Reply to this answer
8q!bruxlet_572

I'd separate the client side from the printer side before chasing a general Windows printing issue. These jobs are reaching the Microsoft service, so a problem that prevents jobs from getting there may not fit this case.

For vendor support, compare a working and failing direct-registered printer with the same model if possible. Include firmware versions, job status, and the results through both direct registration and the connector.

Reply to this answer
Suri

If direct printing keeps causing trouble, it may be worth evaluating other print management options. That won't be a quick fix though, so keeping the connector available could buy time for a proper trial.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions