My newly built PC usually shuts down normally, but occasionally the monitor goes black and disconnects while the fans keep running. It won't wake up, and even waiting a long time doesn't finish the shutdown. What should I check?
Why does my PC sometimes leave the fans running after shutdown?
Answers
If you're using Windows, try turning off Fast Startup first. It's under Control Panel, Power Options, then Choose what the power buttons do. You may need to select Change settings that are currently unavailable before you can change it.
Since it only happens sometimes, give it a few shutdowns to see whether anything changes. Also check Windows updates and install the current chipset drivers from your motherboard manufacturer.
Reply to this answer
Try removing unnecessary external devices as a test, especially anything with its own power supply, such as a USB hub or external drive. A connected device can sometimes feed power back into the motherboard.
You could disconnect them before shutdown and see if the problem returns. If it does get stuck again, unplug devices one at a time and note whether anything changes.
Reply to this answer
For a new build, check the front panel connectors against the motherboard manual. Make sure the power switch is on the correct pins and that the other connectors are seated properly. A switch connector generally isn't polarity sensitive, though LEDs usually are.
Also check whether there's a BIOS update that mentions power or stability fixes. Follow the board manufacturer's update instructions carefully.
Reply to this answer
If it's genuinely stuck and has been sitting there for a long time, holding the power button is a reasonable way to turn it off. The bigger risk is losing unsaved data or interrupting a write, so save your work first when possible. It doesn't mean you're automatically damaging the PC every time.
Reply to this answer
Don't rule out a drive or Windows problem just because the build is new. A failing storage device or corrupted operating system could interfere with shutdown. If the simpler power and device checks don't help, check drive health and look for Windows errors around the time it gets stuck.
Reply to this answer
Add your answer
Answers are reviewed before publication.
Related Discussions