Why is my replacement drive showing as Unmanaged on an SCv2020?

November 16, 2026 3 answers
Asked by 2v+foldmarker_654

I replaced a failed drive in a Dell SCv2020, but the replacement shows as Unmanaged. One replacement had a different config code, while another matches the failed drive's label and has the same result.

It appears in the expected disk folder, but the only available action is Toggle Indicator. A swap-clear request completed after insertion. Does Unmanaged mean the drive is incompatible, or is there another step to check?

Answers

_p37+ferrygauge.6

Unmanaged alone doesn't prove the drive is incompatible. Since the matching config code didn't change the result, I'd check the exact drive part number and model against what the array supports, then look for a drive firmware mismatch or an error reported by the controller.

If support is available, ask Dell to check the drive and controller diagnostics. Without a contract, it may still be worth asking whether they can identify the supported firmware and part numbers.

2v+foldmarker_654:

The array is out of support, but I've tried opening a ticket. I'd especially like a way to verify the firmware rather than just guessing.

Reply to this answer
8f!circuittray_296

Check the disk's parent folder against a working managed disk, not just the folder shown in the interface. A controller shell may provide more detail with Disk show. There is also a Disk set command for changing a parent folder, but that's a controller configuration change, so verify the command and its effects for your software version before touching it.

Also look for errors about block size or drive type. Matching labels won't necessarily tell you whether the controller accepts the drive's format.

2v+foldmarker_654:

SSH is being refused and I haven't found an option to enable it in the interface, so I may need another way to reach the controller shell.

Reply to this answer
c.814!muxnotch

Another possibility with a previously used drive is that it still has an association with its old array. That's not established by the Unmanaged status, though, and it doesn't necessarily mean the drive is unusable.

Before attempting any reset or clearing procedure, check with the seller or Dell about a supported way to reuse it. Don't factory reset the current array to troubleshoot one replacement disk. That could disrupt the data and configuration.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions