RTX 5070 Ti keeps losing display signal and ramping up fans. What should I check?

November 17, 2026 5 answers
Asked by _c95~velourbadge.4

My new RTX 5070 Ti worked for a couple of weeks, but now both monitors sometimes lose signal and the fans ramp up while the PC stays on. A monitor connected to the motherboard kept working during one crash.

I've tried new DisplayPort cables, different outlets and a clean driver install. A week of shop testing didn't reproduce it. What else is worth checking?

Answers

v.594+brindlecog

Start with the physical connections. Shut down, switch off the PSU and unplug it, then check that the card is fully seated in the PCIe slot and that its power connector is fully inserted and latched. Check the PSU end too if the cable is detachable.

Look for a strained bend near the GPU connector, visible damage or sagging. A support bracket may help if the card is sagging. If the connector looks damaged, don't keep using it. Have the shop inspect it and use only a replacement cable compatible with that specific PSU.

Tivnaro+5j:

If the case makes the connector hard to see, the shop could remove the card to inspect the connection more easily.

Reply to this answer
p.639~bracketwhisk

The motherboard display staying on is a useful clue. It points toward the graphics card or its output path rather than the whole PC locking up, but it doesn't prove the card itself is faulty.

Check Reliability Monitor around the time of a crash for hardware errors, and save the details for the shop. Also note whether it happened at idle, during video playback or under load. A stress test that passes for days can still miss an intermittent problem.

Reply to this answer
7j!ferrywicket_316

Try running just the 4K monitor for a while, then try disabling G-Sync if it's enabled. Those are diagnostic tests, not guaranteed fixes, but they may help narrow down whether the display setup is involved.

Reply to this answer
7u+claystencil_461

Watch GPU temperature and hotspot temperature when the card is under load. High temperatures are one possible cause of similar symptoms, though there's no temperature reading here that establishes overheating.

Changing the power management setting to Maximum Performance or trying an undervolt may also change how often it happens. Treat either as a test or workaround, not proof that the problem is fixed.

Reply to this answer
_u58!marblepocket.7

Before buying a bigger PSU, find its exact model and wattage and have the shop check the power setup. A power delivery problem is possible, but the symptoms alone don't tell you the PSU is too small or that a higher wattage unit will solve it.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions