My GPU just died after 12 years, so I'm considering building a new PC from scratch. I've quickly drafted a build and I'm interested in any feedback or suggestions you might have. The build currently includes an AMD Ryzen 7 9800X3D processor and a few other components I listed below. Since I've been using a massive mid-tower casing, I'm thinking a smaller case might be more practical for moving my setup. This new PC will primarily serve general use since I dual boot with Linux and use Windows mainly for gaming. I'm not an enthusiast, so I just want something reliable that will last for the next decade. I'd appreciate any advice on my choices or things I should rethink.
5 Answers
I recommend steering clear of using an ASRock motherboard with the 9800X3D as they’ve had issues in the past. While it’s said that BIOS updates might have fixed the problems, it’s better not to take the risk. I had my 9800X3D fail in an ASRock board after just three months. Better safe than sorry!
This issue was supposedly fixed in a May update, but it’s wise to double-check that your BIOS is up to date before setting everything up.
Just my two cents: I’d upgrade your air cooler since the L9A can struggle with the 9800X3D. Also, try to move away from SATA SSDs; NVMe is the way forward now. And keep an eye on that PSU; I’ve heard some units have had problems, so consider looking up some reviews before committing.
Those cases you mentioned can get a little cramped for temperatures. Something like the Lian Li A3 or Cooler Master NR200P V2 would allow better airflow and cooling management!
My suggestion is to take a look at components like the NCase M2 for your build—it’s compact and supports mATX boards! You can end up with a powerful system without sacrificing space.
I totally agree! That case is a little on the larger side but provides much better support for airflow.
You might want to swap out that tiny Noctua cooler for something beefier. The 9800X3D can run hot, and a 240mm AIO cooler or a larger air cooler could do the trick much better. Smaller cases can struggle with airflow, so make your cooler choice count!
That cooler does work for tiny builds, but seriously consider airflow. With the right setup, it can handle it, especially if you undervolt!
When it comes to RAM, I’d avoid putting in CL40 RAM at 5200 MHz. You'd get better performance with CL30 RAM running at least at 6000 MHz if your budget allows. Speed and latency can make a noticeable difference!
I think you might have selected the wrong one then! Just double-check and perhaps consider upgrading to something faster!
There’s a slightly pricier option that’s CL30 with AMD EXPO for overclocking. Might want to check that out!
I've had a good experience with my ASRock B650-E and 9800X3D setup, but I think I got a solid batch. Just remember to check your BIOS updates regularly!