Which 3D Printer Slicers Work Reliably on Linux?
Asked by
MellowTundra42
I'm trying to move my 3D-printing workflow to Linux, but I keep running into problems with Anycubic Slicer, Creality Slicer, and Bambu Studio. I've mainly tested them on CachyOS, and the native Linux versions haven't been very reliable for me. Are there slicers or installation methods that tend to work better, especially for Anycubic, Creality, and Bambu printers?
Answers
If a native build gives you trouble, the Windows version may work through Wine. I’ve run Anycubic’s software that way on multiple Linux distributions. Bambu Studio also provides AppImage packages, which can be convenient because they avoid some distribution-specific packaging issues.
Reply to this answer
PrusaSlicer and Ultimaker Cura both have native Linux versions and are generally solid choices. If you can get your printer configured in either one, you should be set. I’ve been using PrusaSlicer with my MK4S and haven’t needed Windows for it.
MellowTundra42: I’ll give those another look. Orca Slicer is the only alternative I’ve tried so far, but it didn’t seem to have profiles for all my printers.
Reply to this answer
You may have better luck switching away from the manufacturer-provided slicers. They’re often customized for a specific printer and can be less polished on Linux. PrusaSlicer has been working well for me natively.
Reply to this answer
Orca Slicer is worth trying for Anycubic and Bambu machines, since it supports a lot of their profiles. For resin printers, Chitubox may be one of the more practical options, although it’s not especially impressive.
MellowTundra42: I’ll check whether Orca has added profiles for my Creality Hi and Kobra X.
Reply to this answer
Add your answer
Answers are reviewed before publication.
MellowTundra42: I haven’t tried Wine yet; I was hoping to use the native Linux versions wherever they’re available.