Why won't this DDR4 RAM fit my DDR4 motherboard?

November 17, 2026 3 answers
Asked by 4q+canvasferrule_591

I bought a pair of Corsair LPX DDR4 sticks for an Aorus X570 Elite WiFi motherboard, but the notch seems a few millimeters off compared with my old RAM. I tried turning them around and they still don't line up. What should I check?

Answers

6a+ledgerpocket_357

Don't force them in. The notch in the contacts should line up with the key in the slot in one orientation. If flipping the stick makes it even farther off, compare it with your old RAM outside the board and check the notch position and contact edge.

Reply to this answer
_w37!claspmarker.8

A DDR4 label doesn't guarantee the module underneath is actually DDR4. A flat contact edge and a different notch position compared with your old sticks could point to an older generation, possibly DDR2 or DDR3. Neither will fit a DDR4 slot.

Check the markings on the module itself if they're visible, rather than relying only on the heat spreader or packaging. If the wrong memory was supplied, contact the seller about a return.

Rovlani-3f:

The shape is a clue, but it isn't enough on its own to prove whether the kit was deliberately misrepresented.

Reply to this answer
5~brassquill+

Also check the module type, not just DDR4. A laptop SO-DIMM is much shorter than a desktop DIMM, and registered server memory is different from the unbuffered desktop memory this kind of board uses. Compare the full part number with the motherboard's memory specifications.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions