I built my first PC, but it will not boot and the DRAM debug light stays on. A friend spent several hours troubleshooting it, including flashing the BIOS, testing the memory sticks individually, loosening and reinstalling the AIO cooler, and trying another RAM stick. Nothing worked, so they suspect the RAM, CPU, and motherboard may have been damaged during installation.
The system uses a Ryzen 7 9800X3D and an AORUS B850M Elite WiFi6E motherboard. The CPU was difficult to install, and the black protective cover popped off when I lowered the retention mechanism, so I'm worried I may have forced it or bent socket pins. The parts were bought new and were expensive, and I cannot afford to replace everything immediately.
The GPU powers on, but I do not know whether it is actually working. What is the safest way to test the GPU, power supply, RAM, CPU, and motherboard individually? Should I try to claim a warranty replacement, sell some parts, or have the system tested somehow?
2 Answers
A DRAM light does not prove that the RAM, CPU, and motherboard are all dead. The only reliable way to identify the failed part is to test the components in a known-working compatible system, or test known-good components in yours. Since the parts are new, carefully inspect the CPU socket for bent pins, check that the memory is fully seated, and try one stick at a time in the recommended slot. Do not keep powering it on if the CPU installation or socket looks damaged.
The GPU turning on only confirms that it is receiving power; it does not confirm that it can produce a display or pass a proper test. It is safest to leave it installed and avoid selling anything until the system has been diagnosed. A repair technician, independent builder, or someone with compatible spare parts can test the GPU, power supply, CPU, memory, and board one at a time. If you cannot access a shop, contact the component seller or manufacturer for their diagnostic and return process instead of buying another full set of parts immediately.
Also avoid bending the motherboard while installing the cooler, and make sure the CPU power connector is attached as well as the main motherboard power cable. Those basic checks are worth doing before concluding that expensive components are dead.
My friend tried one of his memory sticks and it still would not boot, but I understand that this still does not identify which component failed. I’ll inspect the socket closely before doing anything else.