I just finished building my PC and everything is running smoothly, except for one issue: the fans and ARGB lights aren't working. I have an Asrock B650M PG motherboard (wifi edition) and a GAMDIAS ATX Mid Tower case with pre-installed fans. I connected the fan header to the USB 3.2 Gen 1 header on the motherboard and plugged the chassis fan into the CHA_FAN1 connector. Additionally, the ARGB connector is plugged into the Addressable LED Header. Am I missing something? Do the fans need to be connected to specific ports? Any advice on how to get my fans powered up would be greatly appreciated, thanks!
2 Answers
What specific model of GAMDIAS case are you using? Some models may have specific requirements for fan and RGB connections, so it’s good to know which one you have.
Did your case come with the fans pre-connected to a hub or controller? Sometimes these hubs need to be connected directly to the power supply to work properly. Make sure all connections are secure and check if there’s a power cable going from the hub to the PSU.
Yeah, there's a hub at the back where they’re all connected. It has a SATA plug and the two connectors I mentioned in my post.
I'm using the Athena M3.