Hey everyone! I'm trying to fully transition to Linux Mint on my HP Pavilion 15-DK1511TX, but I'm stuck at a very frustrating point. I can't seem to switch the BIOS from RAID to AHCI, and because of that, my Linux Mint installer can't detect my hard drive. Here's a quick overview of my setup: I'm using a laptop with an Intel Core i5-10300H CPU and an NVIDIA GTX 1650 Ti GPU, running Linux Mint 21.3 Cinnamon from a live USB. My BIOS is set to UEFI mode with secure boot disabled, and it's running the stock InsydeH20 firmware. However, there's no visible option to change the SATA configuration or storage options. Any advice on how to get around this would be greatly appreciated!
5 Answers
I read somewhere that some HP laptops can only switch from RAID to AHCI through Windows. It's a bit of a hassle, but makes sense in some setups. I’ll look into that more if I can find better references!
Looking at some older models, it seems like some HP laptops default to AHCI, and you might actually be in that mode already! What leads you to believe it's in RAID? If Windows is still installed, it could cause Linux Mint to not detect the drive. Booting into a live USB and checking with gparted may help clarify things.
Is your BIOS set to UEFI or is it traditional BIOS mode? Sometimes that can affect what options you have available, so it’s good to double-check.
Have you checked if your BIOS is up to date? I found a newer version on HP's support site that dates back to May 2025. Sometimes updating the BIOS can unlock more options. By the way, what other options do you see in your BIOS? It’s odd that a laptop would only have a RAID setting!
If you're trying to switch to AHCI, it's worth checking this migration guide. It might have the answers you need. Also, be cautious with how Windows was installed; if it was set to RAID, you may need to adjust some settings or fully shut it down, so it doesn't block the hard drive access during the Linux install.
Yeah, that's a good point. Make sure to check if BitLocker or fast startup features are enabled in Windows, as these can definitely interfere with detecting the HDD in Linux.