I'm in need of a solution to turn on a PC located at a remote site that doesn't support Wake-on-LAN. Ideally, I'd like a way to trigger the power button over Ethernet since the site doesn't have Wi-Fi and I prefer not to set up an access point. Does anyone have recommendations for products or methods that could accomplish this? Thanks!
5 Answers
If you're into DIY solutions, you could also consider using a Raspberry Pi with a relay to bridge the power switch pins on the motherboard. This way, you can remotely trigger the power button whenever needed.
Another option is to invest in a device like an IP KVM switch that has the ability to power on connected systems. Look for something like PiKVM or other similar products, which can control the power state remotely.
One way to handle this is by configuring the BIOS to turn the PC on when power is restored. You can then use an IP-based outlet or smart plug to cycle power to the machine, which should effectively power it back on. Just make sure the PC doesn't go into standby or sleep modes; it should be set to fully shut down instead.
You could explore getting a managed power strip. These devices have a network port and allow you to control power to outlets remotely via a web interface. Just ensure the PC is set to boot when power is restored in the BIOS. Check out options on Amazon or your local computer supply shops.
For quick control, Kasa Smart Plugs are handy. Just enable the option to "Switch On after Power Loss" in your BIOS settings and you'll be able to turn the device on when necessary through their app.
Related Questions
Lenovo Thinkpad Stuck In Update Loop Install FilterDriverU2_Reload