Is the Power Cable Fully Seated on My RTX 5070?
I'm installing an RTX 5070, but the power cable still appears to have a small gap and I can't seem to push it in any farther. Does this…
GPU installation
How can I align my GPU with the case without damaging the PCIe slot?
The screw holes on my graphics card's bracket do not line up with the case holes. I can force the card into position and screw it down, but…
No Display After Shipping PC—Stuck on MSI POST Code
I shipped my PC overseas in a custom hard case with most components removed, then reassembled it after arrival. The system has a Ryzen 9 9950X3D, PNY RTX…
RX 9060 XT Won’t Fully Seat in the PCIe Slot
I'm installing an RX 9060 XT in a Phanteks XT Pro case with a B650 EAGLE AX motherboard, but the graphics card won't fully slide into the PCIe…
GPU Won’t Fully Seat in the PCIe Slot
I'm installing an RX 9060 XT in a Phanteks XT Pro case with a B650 EAGLE AX motherboard, but the graphics card doesn't seem to slide completely into…
PC Powers On but Shows No Display After Installing a New GPU
I received a GTX 5060 Ti and removed my GTX 1650 to install it, only to discover that the newer card needs a dedicated power connection from the…
How should I power an ASUS Prime RX 9070 XT with three connectors?
I bought an ASUS Prime RX 9070 XT graphics card and an ASUS Prime power supply rated at 750W Gold. The graphics card has three power connectors, and…
Could This AIO Orientation Damage My Water-Cooled GPU?
I'm installing an all-in-one cooler on my water-cooled GPU and want to make sure the radiator and tubes are positioned safely. Based on the setup shown in the…
Switching from Intel to Ryzen and installing a new GPU—do I need to reinstall Windows?
I've built PCs before, but this is my first major upgrade. I'm moving from an Intel processor to a Ryzen CPU, which also means I'm installing a new…
Is It Safe to Use a GPU Slot After Breaking the Retention Clip?
While trying to remove my graphics card, I pressed down on the PCIe slot's retention clip and twisted the card. I heard a click, and the clip moved…
What should I do before installing my new RTX 2060?
I ordered a PNY RTX 2060 12GB, and it should arrive on Monday. I'm currently using another graphics card and I'm not sure whether I need to remove…
Can I use the second PCIe slot after breaking the GPU retention clip?
While replacing my power supply, I accidentally pressed too hard on the GPU release clip and broke it off the primary PCIe slot. Can I install the graphics…
What should I do before installing my new RTX 2060?
I ordered a PNY RTX 2060 12GB, which should arrive on Monday, and I want to install it before school starts. I'm currently using another graphics card and…
Case fans stay loud even when BIOS fan control is set to 0%
I installed a new graphics card earlier today, and afterward my computer's case fans became unusually loud. I checked the BIOS and lowered their fan setting, but nothing…
How should I connect the three-plug adapter for my RTX 5070 Ti?
I'm building my first PC and am testing the components outside the case before installing everything. My graphics card is an ASUS Prime RTX 5070 Ti 16GB, and…
How should I connect my RTX 5070 Ti power adapter?
This is my first PC build, and I'm testing the components outside the case before installing everything. I have an ASUS Prime RTX 5070 Ti 16GB and an…
New PC Powers On but Shows No Display
I just finished building my first PC, and all the fans and lights come on, so it seems to boot normally. However, the monitor stays blank. I've tried…
Can I safely power a Gigabyte RTX 5070 Ti with two PCIe cables and a pigtail?
I'm upgrading from an RTX 2080 and am still getting familiar with the newer 12V-2x6 GPU power connectors. My Gigabyte RTX 5070 Ti includes an adapter with three…
Can I power a Gigabyte RTX 5070 Ti with two daisy-chained PCIe cables?
I'm upgrading from an RTX 2080 and am still getting familiar with the newer 12V-2x6 GPU power connectors. My Gigabyte RTX 5070 Ti includes an adapter with three…
How long does it really take to swap a graphics card?
Is replacing a GPU really a roughly 10-minute job? I'm curious how long it usually takes in practice and what factors can make the process faster or slower.