Is a Broken PCIe Slot Retention Clip a Problem If the GPU Still Works?
I accidentally broke the plastic retention clip on my motherboard's PCIe slot while removing my graphics card. The GPU is fully seated, secured to the case with the…
GPU sag
Is a Broken PCIe Retention Clip a Problem if the GPU Still Works?
I accidentally broke the plastic retention clip on my motherboard's PCIe slot while removing the graphics card. The GPU is fully seated, secured to the case with its…
Is an mATX motherboard a good fit for an ATX case?
I'm planning a PC build and really like the case I selected. I found an mATX version of the motherboard for about €40 less than the full-size ATX…
Will an mATX motherboard look awkward or affect GPU support in an ATX case?
I'm planning a gaming PC using an ATX case, but I found the mATX version of the motherboard I want for about €40 less than the full-size ATX…
When is a GPU support bracket actually necessary?
Is there a practical rule for deciding when a graphics card needs a support bracket or holder? I'm wondering whether the main factors are the card's weight and…
ASRock Challenger or XFX Quicksilver for a Radeon RX 9070 XT?
I'm new to Radeon graphics cards and recently sold my 16GB RTX 5060 Ti to upgrade to a Radeon RX 9070 XT. I'm gaming at 1440p and want…
My GPU’s PCIe retention clip broke and the PC won’t boot—do I need a new motherboard?
The plastic locking tab that holds my graphics card in the motherboard's PCIe slot has broken. The PC powers on and the graphics card lights up, but the…
Could an FSR sensor automatically monitor and adjust GPU sag support?
I'm designing a GPU sag support and was wondering whether a cheap force-sensitive resistor (FSR) connected to a microcontroller could measure how much pressure the support is applying.…
Will a GTX 1060 Sag Without a GPU Support?
I'm wondering whether a GTX 1060 is heavy enough to bend or sag when installed without a support bracket. GPU supports are expensive and difficult to find where…
Will a GTX 1060 sag without a GPU support?
I'm wondering whether a GTX 1060 is heavy enough to bend or sag when installed without a support bracket. GPU supports are expensive where I live and aren't…
Is it okay to keep my PC horizontal for support?
I'm currently using my PC horizontally because my video card is quite heavy, and I'm worried about it bending the PCI slot. I don't have a support brace,…
Why does my GPU keep crashing every couple of months and how can I fix it?
I'm having a frustrating issue with my Nvidia RTX 4090 GPU that occurs roughly every two months. The problem is that my screen goes black and the GPU…
Should I Choose the ASUS RTX 5070 Dual or Prime?
I'm considering the ASUS RTX 5070 graphics cards and can get both the Dual (2-fan) and Prime (3-fan) versions for the same price. My concern is that the…
Can Monofilament Fishing Line Be Used to Fix GPU Sag?
I have a PowerColor 7800xt that's sagging quite a bit, and I'm considering using monofilament fishing line to level it out. My idea is to run the line…
Looking for Solutions to Reduce GPU Sag in My PC Build
I recently built a PC with an RX 9070 XT graphics card inside a Deepcool CH160 case, and I've run into the challenge of GPU sag. Unfortunately, my…
How Can I Properly Support My GPU Without Causing Damage?
Hey everyone! I recently built my first PC and noticed that my GPU looks a little slanted after just a few days. I found out that GPU sag…
Does the RTX 3080 10GB Founders Edition sag at all?
I'm curious if the RTX 3080 10GB Founders Edition will sag. I've heard varying opinions and wanted to know how much sag is typical or if it's even…
Is it okay to delay installing my GPU bracket?
I just installed my 5070 Ti GPU, and it looks and performs amazing! The only issue is that I forgot to add the sag bracket and I have…
Can I Use LEGO Bricks to Support My GPU and Prevent Sagging?
Hey everyone! I've always had a blast building with LEGO and I was thinking—could I build a little stand with LEGO bricks to support my GPU and prevent…
Can I Use LEGO Bricks as an Anti-GPU Sag Stand?
Hey everyone! I've got a fun idea and I'm hoping you can help out. I've always been a fan of LEGO, and I was curious if it would…