I'm trying to configure my Zebra DS2208 scanner to work in hands-free mode, but I'm having a tough time. It seems like there's a "presentation mode" where it should scan barcodes automatically as I pass them over, but I can't get it to work. I've gone through the manual but came up empty. I also tried using 123Scan, but I'm not clear on how it functions. The scanner won't input barcodes when 123Scan is running, but it works fine once I close it. I would appreciate any tips or configuration steps to enable the hands-free mode. I did scan some commands to reset to default and select the USB keyboard option, but I still feel like I'm missing something crucial.
5 Answers
You're actually looking for presentation mode, which is a hands-free feature. Just a heads up, if you didn’t get the holder for your scanner, it won’t be able to switch to that mode. Make sure you have all the right equipment!
To enable presentation mode, make sure your scanner is placed in a stand rather than just holding it. From 123Scan, it will only scan within that app, which is why it stops working once you try to use it elsewhere. Also, ensure that your scanner's firmware is up to date—you might miss out on features if it's not current.
It sounds like you're after the "presentation mode" feature! This setting allows the scanner to read barcodes as you pass them by without needing to pull the trigger. You can check out this helpful link that explains how to enable it: https://support.magicline.com/hc/en-001/articles/36686103777297-How-to-set-up-the-Zebra-DS2208-barcode-scanner. There are some additional configurations there that might be useful for you. Good luck!
Actually, the DS2208 does support a hands-free function, but you might be looking at the wrong manual. It's primarily a handheld scanner, although it can operate in presentation mode with the proper setup, like using the holder. Just get that setup right!
Related Questions
Lenovo Thinkpad Stuck In Update Loop Install FilterDriverU2_Reload