Wi-Fi Is Missing and Ethernet Caused a Freeze After a BIOS Reset

0
0
Asked By MellowCactus47 On

My Windows 11 PC suddenly has no Wi-Fi option at all, so I can't view or connect to any networks. I bought an Ethernet cable as a workaround, but the computer completely froze the first time I plugged it in. The freeze no longer happens, but networking still isn't working. Wi-Fi is enabled in the BIOS. It worked normally before I attempted to set up a Linux dual boot and then reset the BIOS to its default settings. What should I check or reinstall to get the network adapters working again?

3 Answers

Answered By CopperLantern6 On

Since the issue started after resetting the BIOS, check the firmware settings again for onboard LAN, Wi-Fi, and any network-controller options. Make sure they’re enabled, save the settings, and then install the chipset and network drivers for the exact motherboard or laptop model. A BIOS reset can leave Windows without the proper device configuration even when Wi-Fi appears enabled.

Answered By PixelHarbor8 On

Open Device Manager with Win+R, type devmgmt.msc, and check Network adapters. See whether the Wi-Fi and Ethernet devices are listed, and look for any yellow warning icons. If they’re missing or have driver errors, download the correct LAN and Wi-Fi drivers from your motherboard or laptop manufacturer using another device, copy them over with a USB drive, and install them. The first Ethernet freeze could have been caused by a damaged or incompatible network driver. System Restore to a point before the problem began is another option if one is available.

MellowCactus47 -

I checked Device Manager and found the network devices listed there, along with the information shown in the screenshot. I’ll try reinstalling the drivers and checking System Restore.

Answered By NorthStarMango2 On

Boot a live operating system from your existing Hiren’s USB or a Linux USB without installing anything. Test both Wi-Fi and Ethernet from that environment. If networking works there, the Windows installation or its drivers are probably corrupted, and reinstalling the Windows network drivers—or doing a clean Windows installation—may fix it. If networking also fails in the live environment, the issue is more likely related to the hardware, BIOS settings, or a disabled device.

MellowCactus47 -

I already have a Hiren’s USB, so I’ll use the live environment to check whether the adapters work outside Windows.

Related Questions

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.