I just built my first PC and it seems like everything is working fine, but I'm getting no display on my monitors when I boot up. Here are the steps I've tried so far:
1. Changed the RAM slots.
2. Loosened the GPU screws to ensure the HDMI can fully connect.
3. Switched HDMI cables and tried different monitors.
4. Unplugged everything and set it all up again.
5. Moved the GPU to another slot on the motherboard.
Nothing has resolved the issue yet, so I could really use some help. Here are my specs:
- Ryzen 5 7600X processor
- ASUS Prime B650M-A WiFi II motherboard
- ASUS Dual Radeon RX 7700 XT GPU
- Samsung 1TB 990 EVO Plus SSD
- MSI MAG Forge 121A case with a 750W power supply
- Corsair 32GB DDR5 RAM
Thanks for any guidance you can offer!
2 Answers
First, check if your motherboard has any blinking lights when you boot it up. Those can indicate what might be wrong. Refer to your motherboard's documentation for the meaning of those light sequences.
Also, if available, connect your monitor to the HDMI port on the motherboard instead of the GPU. Sometimes it could be a GPU driver issue that leads to no display.
I've experienced this issue before! Try holding down the reset button on the back of the motherboard for a few seconds to see if that helps. If it doesn't, remove the BIOS battery for about a minute and then put it back in. Give that a shot and see if it resolves the no display problem!
Related Questions
Lenovo Thinkpad Stuck In Update Loop Install FilterDriverU2_Reload