I'm having issues with my computer after trying to install 4 sticks of Patriot 16GB DDR4 RAM at 3200MHz on my 12400F with a B760D4 motherboard. I keep getting errors like "IRQL not less or equal," "kernel mode heap corruption," and "page fault in nonpaged area," causing my system to reset. Currently, I'm running 2 sticks without any problems. Can anyone help me troubleshoot or fix this?
4 Answers
Honestly, tackling 4 mixed DIMMs with that CPU isn't the best route. You might have better luck with a matched set specifically designed for your motherboard. Just a thought!
Try testing each RAM stick individually first. Sometimes one stick can be bad, leading to no boot or various errors like you mentioned. If one does cause errors, you might want to consider returning it too. And yeah, mixing DIMMs, especially on a non-K Intel CPU, can lead to issues, so be careful with that!
If the RAM sticks are all the same model, you should definitely clear your CMOS after installation. This resets any BIOS settings that might be causing conflicts. It's a good first step when experiencing errors with new hardware.
It sounds like you might have two different RAM kits instead of a matched 4x16GB set. Just to clarify, are you using two separate 2-stick sets? Mixing RAM can definitely lead to issues, especially with timings and compatibility. Double-check that all your sticks are the same model and try to install them again after clearing your CMOS.
Yeah, if you're mixing sets, it could be causing instability. I'd recommend testing each stick one at a time to see if one of them is faulty. It's also worth checking if your BIOS is fully updated.