I recently used my external hard drive to create a Windows 11 installation flash drive for a friend. Now, when I try to access the games I had downloaded, it says I need to download them again because my 10TB external hard drive is only showing a capacity of 32GB. What's going on? Did I accidentally mess something up, or is the drive failing?
4 Answers
When you used that drive to flash Windows, it likely formatted the drive to a 32GB size because that's the maximum for FAT32. If you go into Windows Disk Management, you should be able to format it again to restore it to the full 10TB. Just keep in mind that any existing data on it will be lost in the process.
Exactly! Just make sure to back up any critical files first.
Just a heads-up! Sometimes people end up with fake drives that have small SD cards inside them to make them weigh like a larger drive. If it sounds too good to be true, it probably is. Check your drive; it might just be marketed incorrectly.
It sounds like you might have overwritten the partition table during the Windows installation. Check your Disk Management to see if it shows any unallocated space. If it does, you can recreate the partition to restore your full storage capacity. If there's no unallocated space, the drive might be faulty.
Unfortunately, if you had data on there, it looks like you might have lost it when you reformatted. Only way to recover your space now is through the process others mentioned—format it again and recreate the partition for the full drive size. Good luck!
So, just to confirm, I need to format the drive, and then it'll show up as 10TB again?