I recently moved my PC into a new case and now it won't power on. Initially, when I plugged it in and flipped the switch, the RGB RAM lit up fine, but when I hit the power button, things went haywire. The new fans connected to the RGB controller on the motherboard started blinking green, and after I unplugged them, the motherboard's RGB lights began blinking red. I tried taking everything out and setting it up on a cardboard box, but the issue persisted. I built it on a carpet, but I was grounding myself frequently and wasn't wearing anything super static-prone. Given that the system worked before I pressed the power button, I'm wondering if it could be a static discharge issue and how I might diagnose the problem. If it turns out I need a new motherboard, at least it's Black Friday, right? What are your thoughts on troubleshooting this?
3 Answers
Totally get your frustration – switching cases can be tricky! The blinking LEDs indicate that the motherboard is getting some power, but not enough to start booting. It could be as simple as a loose cable. Since you've already stripped everything down, you might want to ensure you're using the right RAM slot as well. Take it out and reseat it, or try another stick if you have one. Also, check the motherboard manual for any POST codes that can guide you further.
It sounds like you might have overlooked a few things during your case swap. Just because your RAM lights up doesn't mean the system is fully functional. Make sure that all power cables, especially the 24-pin and CPU connectors, are securely plugged in. Check your motherboard manual for any diagnostic LEDs or beep codes that can help identify the problem. If you still have issues, try shorting the power headers on the motherboard to see if that gets your system to turn on again.
Related Questions
Lenovo Thinkpad Stuck In Update Loop Install FilterDriverU2_Reload