I'm struggling to get my ARGB lighting synced up across my case fans, AIO cooler, and GPU. I didn't put my PC together myself; it was assembled by a local shop, which leaves me a bit puzzled about the cable management and connections. Here's what I have: 10 ARGB fans total (7 for the case and 3 for the AIO), all from ZEBRONICS and with no software support. Currently, the only thing working with SignalRGB or MSI Center is the AIO's RGB. The case fans can only be controlled through a physical button, and my GPU (ASRock SL 9060XT) has a buggy Polychrome Sync that's pretty unreliable. I'm looking for solutions to get everything synced properly. If it sounds complicated, I'm open to purchasing a Thermalright ARGB Fan Hub Controller if necessary. Here are my specs for reference: **Motherboard:** MSI MAG B650 TOMAHAWK WIFI, with some RGB connectors available. Any guidance would be really appreciated!
1 Answer
First, make sure your case fans are actually connected to the motherboard. You mentioned only one cable is connected to JRGB_V2_2; try connecting the others to available RGB headers too. That way, you can control more of your fans from the software.
You can usually connect your GPU ARGB to a separate header on the motherboard if available, or daisy chain them. As for the PWM cables, they typically go into the fan headers on the motherboard, which will let you manage fan speeds through the BIOS.
I have JRGB1 and JRGB2 open now. If I use JRGB1 for the 3 side fans and JRGB2 for the 3 bottom fans, where should the GPU's ARGB cables go? Plus, how do I handle the PWM connections?