Hey everyone, I just built my first PC and I'm running into issues after I enabled Expo in the BIOS. At the default settings, my computer runs stable, but when I try to boost to 6000, it keeps crashing and giving me BSODs. I'm wondering if this is a common issue or if it might mean I have some faulty hardware. I've already updated both the BIOS and chipset drivers to the latest versions. Here are my specs: Ryzen 7800x3d, T Create expert cl30 DDR5 (2x16GB) 6000MHz, Asus Prime 5070 ti, and MSI PRO B650-S wifi. This is super frustrating, so any advice would be really helpful!
1 Answer
First off, what's the RAM voltage set at? A lot of times you can manually increase it to about 1.4V if needed. Just a tip, make sure the RAM timings are good too! Sounds like you've got solid components, but the voltage could really help with stability at higher speeds.
I'm really new at this, but the BIOS shows it's set to DDR5 6000MT/s 30-36-36-76 at 1.350V. Is that something I should change?