I'm having a tough time connecting my ARGB fans to my B550 motherboard using an ARGB hub. This is my first time dealing with RGB setups, and it's been quite a headache! I've plugged the 3-pin male cable from the Front I/O into the hub's input and connected the ARGB cables from the fans to the hub, but when I power on my PC and try to change the colors, nothing happens. What am I missing? Any help would be appreciated!
2 Answers
It sounds like your fans and lights are working fine since you mentioned that they light up. The problem seems to be with the Front I/O not controlling the colors. Make sure that the RGB control button on the front panel is properly connected to the motherboard or hub. Sometimes it can get disconnected during the build, so that might be worth checking out.
Could you clarify what exactly you mean by 'Front I/O'? Are you talking about the case's front panel that has the power and RGB buttons? If that's the case, it sounds like the issue might be with how it's connected to the hub or motherboard. Maybe double-check the connections?
Thanks for clarifying! If I were you, I’d look closely at the connections to ensure everything is snug. Sometimes it's just a matter of one wire being loose.
Thanks for the tips! I think I might check those connections again to see if I can get it to work.