I'm looking for ways to maximize the performance of my PC, particularly for competitive gaming in Counter-Strike 2, but I also need it to handle AutoCAD and other engineering applications smoothly. Here are my specs:
- CPU: i7-10700KF
- GPU: Gigabyte RTX 3060 Ti Gaming OC LHR 8GB
- RAM: 64GB (4x16GB) HyperX 3200MHz CL16
- Motherboard: Gigabyte Z590 Gaming X
- PSU: be quiet! Pure Power 11 FM 750W
- Cooling: AIO liquid cooling
I'm aiming for:
- 300+ FPS at 1080p for gaming
- Improved stable performance in terms of 1% lows and frametime
- Total stability during gaming sessions, with no crashes
- No risky overvolting or degradation of my hardware
Currently, I'm considering:
- Setting CPU to 4.9 GHz all-core with a slight undervolt
- Undervolting the GPU to around 0.900V at ~1900-1920 MHz
- Enabling XMP for my RAM at 3200 CL16, Gear 1
- Manual tuning for VCCSA/VCCIO because of my 64GB RAM
- Turning on NVIDIA Reflex and Boost
- Adjusting Windows 11 settings (Ultimate Performance plan, HAGS ON, Game Bar OFF)
I have a few questions:
1. Is 4.9 GHz the optimal setting for my 10700KF in terms of performance vs. stability?
2. Is achieving 300+ FPS feasible with my current CPU in CS2?
3. Are there any additional BIOS or Windows tweaks I should consider?
4. Does my plan involve any risky or unnecessary steps?
3 Answers
There's a video that shows a 3060 Ti hitting over 300 FPS, but it was paired with a 5800X3D, which is a faster CPU. You may need a stronger processor to reach that goal. If XMP isn't enabled yet, definitely do that first! About NVIDIA Reflex, make sure you're using it to reduce latency, but it could affect FPS if you're exceeding your monitor's refresh rate.
You've clearly done some thorough research. Check out some overclocking resources on YouTube or forums specific to your CPU and GPU. Aim to gradually push your CPU to its limits with various benchmarks and then dial back if it becomes unstable. This will be a bit of trial and error, but it could significantly enhance your FPS. Just keep an eye on stability while testing!
For maximum performance, try using buildzoid's overclock settings. If you're not already hitting thermal limits, undervolting isn't going to help much besides reducing power usage. Definitely keep NVIDIA Reflex enabled; it can improve input latency. Just be aware that Boost can sometimes cap your FPS, so you'll have to experiment a bit there!
Related Questions
Lenovo Thinkpad Stuck In Update Loop Install FilterDriverU2_Reload