I recently built my first PC, and while it powers on, I'm getting a 'no display found' message when I connect it to my monitor. I've gone through a few troubleshooting steps already:
- Ensured the HDMI cable is plugged into the GPU (I also tried the motherboard).
- Checked that all cables are securely connected (motherboard, GPU, PSU).
- Reseated the RAM.
- Updated the BIOS using flash BIOS.
I'd really appreciate any additional suggestions or help! Thanks in advance for the ideas!
2 Answers
Make sure to check if your motherboard has any warning LEDs lighting up. I faced a similar issue with my new setup, and I resolved it by flashing an older BIOS version and connecting the HDMI to the motherboard, using the integrated graphics from my CPU. After that, I installed the necessary drivers, and everything worked fine! You can find some helpful troubleshooting tips here: [ASUS Support Link](https://www.asus.com/us/support/faq/1042678/). Also, verify the RAM is seated correctly and don’t forget to hit the ‘Del’ key to enter BIOS. Good luck!
Have you tried switching to a DisplayPort cable instead of HDMI? Sometimes, certain monitors work better with that connection type. It’s worth checking out if you have one on hand!
I just tried it and no luck.
I think this may be it. I have a combination of the white and greenish-yellow LEDs on the mobo.