Experiencing Read-Only File System Errors Every Month – Need Help!

You mentioned using AI tools while installing software, which can be helpful, but be cautious—it can lead you astray too! Make sure to review what it suggests before executing commands in the terminal. If you need more help, you can describe your PC specs and errors directly for better assistance.

I suspect the issue is with your storage drive or RAM. You could run a SMART test using smartctl and a memory test with memtest. Just a heads-up, reseating your RAM sticks could also make a difference if they aren't properly in place. Sometimes, they look seated but they aren't. If your storage drive is older, that could be the culprit too.

When a system detects filesystem issues, it might switch to read-only mode to protect your data. Instead of reinstalling, monitor your system with commands like 'sudo dmesg -w' during the failures to catch any detailed error messages. This approach should help you pinpoint the problem.

It sounds like your hardware might be malfunctioning, which can lead to data corruption. If you haven't rebooted after the error, run 'sudo dmesg' right away to check for hardware failure messages. A failing storage device could cause this, which is more straightforward to replace than bad RAM or CPU. Have you checked your storage drives?

Take a look at your logs—they could provide insights on why your file system is going read-only. You might want to compare logs from your last successful session with the ones where you experience issues. Remember, reinstalling doesn't solve the root problem. You need to identify what's going wrong to prevent a repeat.