I'm currently running a PC build with a Ryzen 7800X3D, GeForce 5080, and 64GB of RAM. My power supply unit is an XPG Core Reactor 750W, but it doesn't come with a native 12VHPWR connector. I've been using a Corsair 12VHPWR cable for the last three months, which seems to be working well so far. The voltage readings I get stay below 12.144, even during heavy usage like a 30-minute FurMark test, and while the cable gets a bit warm, the connector stays cool, with the GPU pulling about 370 watts. I've heard conflicting advice: some say it's risky to use a non-native cable long-term, while others suggest I should upgrade to a newer PSU with built-in support for the 12VHPWR connector. Should I go ahead and change my PSU, or is my current setup safe?
3 Answers
Have you checked if your PSU box had any adapter cables included? Some older PSUs come with them.
It's important to note that only certain adapter cables have had issues because of uneven power distribution. If your setup isn’t overheating and the connections are secure, you’re likely in good shape. Just keep an eye on it while under load. If there’s no heating issue, you should be fine!
That's a relief! I was about to run out and buy a new PSU. I made sure the cable was properly connected after relocating for work. Thanks for the heads-up!
You can mix cable brands as long as they’re pinned correctly, which they are between Corsair and XPG. If they weren’t, your system wouldn’t be functioning at all.
Nope, it’s a relatively new model from 2023, and there weren’t any 12VHPWR cables in the box. The Corsair cable I’m using has two 8-pin connections for the PSU and a single 12-pin for the GPU, rated at 600 watts.