I'm having an issue with my Hills Spectrum 600 microphone, which is only recording audio on the left speaker. I've tried all the usual troubleshooting steps like updating and reinstalling the drivers, and I've unplugged and plugged it back in multiple times. Unfortunately, I can't change the input format for it. I'm not very tech-savvy and I'm at a loss for what else to try. I've even looked for drivers online, but found nothing. Has anyone experienced this before?
1 Answer
The Hills Spectrum 600 is actually a mono microphone with a mono TS plug. If you're plugging it into a stereo input that expects a TRS plug, you'll only hear audio from one channel. You might want to consider getting an adapter that can split the mono signal so you can hear it in both channels. Something like this adapter could help: [Hosa GPP-419](https://www.amazon.com/Hosa-GPP-419-Adaptor-Inch-TRS/dp/B001JYSMV0).
I tried three different adapters and had issues with all of them. One adapter did convert the signal, but it picked up a ton of noise.